Filter
Top Products
Hitachi Command Control Interface (CCI) User and Reference Guide v
Preface
This document describes and provides instructions for installing and using the Command
Control Interface (CCI) software for Hitachi RAID storage systems. CCI enables the user to
configure, perform, and manage operations for the following data management/business
continuity features from the open-systems host:
TrueCopy
ShadowImage
Copy-on-Write Snapshot
Universal Replicator
Database Validator
Data Retention Utility/Open LDEV Guard
This document applies to the following Hitachi RAID storage systems:
Hitachi Universal Storage Platform V/VM (USP V/VM)
Hitachi TagmaStore
®
Universal Storage Platform (USP)
Hitachi TagmaStore Network Storage Controller (NSC)
Hitachi Lightning 9900™ V Series (9900V)
Hitachi Lightning 9900 (9900)
This document assumes the following:
The user has a background in data processing and understands RAID storage systems and
their basic functions.
The user is familiar with the Hitachi RAID storage systems and has read and understands
the User and Reference Guide for the storage system.
The user is familiar with the host operating system.
The user is familiar with the Hitachi business continuity features.
Notes:
The term “Hitachi RAID storage system” refers to all supported Hitachi storage systems,
unless otherwise noted.
The terms used for the Hitachi RAID storage systems refer to all models of the storage
system, unless otherwise noted. For example, “Universal Storage Platform V” refers to
all models of the USP V, unless otherwise noted.
Notice: The use of the CCI software and all other Hitachi Data Systems products is governed
by the terms of your agreement(s) with Hitachi Data Systems.
CCI Software Version
This document revision applies to CCI software version 01-22-03/02.