Filter
Top Products
Hitachi Command Control Interface (CCI) User and Reference Guide 249
4.12.3 Raidvchkscan Command
The raidvchkscan command displays the fibre port of the storage system (9900V and later),
target ID, LDEV mapped for LUN#, and the parameters for validation checking, regardless of
the configuration definition file. Table 4.31 lists and describes the raidvchkscan co
mmand
parameters. Figure 4.40 through Figure 4.42 show examples of the raidvchkscan c
ommand.
Note: This command will be rejected with EX_ERPERM by connectivity checking between CCI
and the Hitachi RAID storage system.
Table 4.31 Raidvchkscan Command Parameters
Parameter Value
Command Name raidvchkscan
Format raidvchkscan { -h ⎪ -q ⎪ -z ⎪ -p <port> [hgrp] ⎪ -pd[g] <raw_device> ⎪ -s <seq#> ⎪ -t <target> ⎪ -l <lun>
⎪ [ -f[x] ] ⎪ -v <op> }