Filter
Top Products
Hitachi Command Control Interface (CCI) User and Reference Guide 185
Table 4.8 Specific Error Codes for Pairresync
Category Error Code Error Message Recommended Action Value
Volume status EX_ENQVOL Unmatched volume status
within the group
Confirm status using the pairdisplay command.
Make sure all volumes in the group have the
same fence level and volume attributes.
236
EX_INCSTG Inconsistent status in group Confirm pair status using pairdisplay. 229
EX_INVVOL Invalid volume status Confirm pair status using pairdisplay -l. 222
Unrecoverable EX_INVSTP Invalid pair status Confirm pair status using pairdisplay. 228
Note: Unrecoverable errors are fixed and will not be resolved, even after re-executing the
command. If the command failed, the detailed status will be logged in the CCI command log
($HORCC_LOG) (see Table A.2), even if the user script has no error handling.
The primary and secondary volumes must not be mounted on any UNIX system because this
command renews data on both the primary and secondary volumes. This command cannot
execute copy rejection in case of the trouble (single error in cash memory, etc...) which
made the target volume is accompanied by maintenance work.(HORC only)
ShadowImage Environment
pairresync -g oradb1 -FHORC
SVOL
P/P
VOL
SVOL
SVOL
Ora(TrueCopy)
Oradb1(ShadowImage)
Oradb2(ShadowImage)
0
1
0
Seq#
30052
Seq#
30053
Figure 4.7 Example of -FHORC Option for Pairresync
TrueCopy Environment
pairresync -g ora -FMRCF 1
PVOL
S/P
VOL
SVOL
SVOL
Ora(TrueCopy)
Oradb1(ShadowImage)
Oradb2(ShadowImage)
0
1
0
Seq#
30052
Seq#
30053
Figure 4.8 Example of -FMRCF Option for Pairresync