Filter
Top Products
Hitachi Command Control Interface (CCI) User and Reference Guide 211
4.8 Displaying Pair Status (Pairdisplay)
The pairdisplay command displays the pair status allowing you to verify completion of pair
operations (e.g., paircreate, pairresync). The pairdisplay command is also used to confirm
the configuration of the pair connection path (the physical link of paired volumes and
servers). The pairdisplay command can be used for a paired volume or a group of paired
volumes. Table 4.17 lists and describes the pairdispl
ay command parameters and returned
values. Figure 4.20 and Figure 4.21 show examples of the paird
isplay command and its
output. Figure 4.22 shows examples of the -m opti
on of the pairdisplay command.
Table 4.17 Pairdisplay Command Parameters
Parameter Value
Command
name
pairdisplay
Format pairdisplay{ -h ⎪ -q ⎪ -z ⎪ -g <group> ⎪ -d <pair Vol> ⎪ -d[g] <raw_device> [MU#] ⎪ -FHORC [MU#]⎪ -
FMRCF [MU#]⎪ -d[g] <seq#> <LDEV#> [MU#] ⎪ -c ⎪ -l | -f[xcdm] | -CLI ⎪ -m <mode> ⎪ -v jnl[t] |-v ctg |-v pid
}