Filter
Top Products
6 - 1
6
Technical Specifications
Ring Scanner / Imager
Technical Specifications
Environmental Specifications
ASCII Character Equivalents
Values from 1128 through 1255 (hex values 80h through FFh) may also be set. But the conversion of those characters to
printable characters is not standardized. Therefore, they are not included in the table.
I/O Port 9 spring pin port (when used with Dolphin D70e in the Honeywell Wearable Solution
22 spring-pin, symmetrical port (when used with HX2 or HX3)
Module Size 1D Ring Scanner: 1.9” x 1.1” x 1.1” (48mm x 28mm x 28mm)
2D Ring Imager: 1.9” x 1.1” x 1.3” (48mm x 28mm x 33mm)
Module Weight 1D Ring Scanner: 1.75oz / 49.6g
2D Ring Imager: 1.85oz / 52.4g
Operating Temperature -4° F to 122° F (-20° C to +50° C)
Storage Temperature -22° F to 122° F (-30°C to +50°C)
Water and Dust
Resistance
Sealed to IP-54 specifications or better
Humidity 5% to 95% relative humidity, non-condensing
Corrosion Corrosion resistant when exposed to water and common cleaning chemicals
Chemical Resistance Corrosion resistant when exposed to water and common cleaning chemicals
Abrasion Resistance Housing resists normal abrasion from dirty hands.
Scan Value Hex Value
Full ASCII Code 39
Encode Char.
Keystroke
1000 00h %U CTRL 2
1001 0lh $A CTRL A
1002 02h $B CTRL B
1003 03h $C CTRL C
1004 04h $D CTRL D
1005 05h $E CTRL E
1006 06h $F CTRL F
1007 07h $G CTRL G
1008 08h $H CTRL H
1009 09h $I CTRL I
1010 0Ah $J CTRL J
1011 0Bh $K CTRL K
1012 0Ch $L CTRL L
1013 0Dh $M CTRL M
1014 0Eh $N CTRL N
1015 0Fh $O CTRL O
1016 10h $P CTRL P