Filter
Top Products
3 - 29
Two Discrete Lengths (Parameter L2)
This option decodes only those codes containing two selected lengths. For example, when you want to scan only
Codabar symbols containing 2 or 14 characters, scan the “Codabar Two Discrete Lengths” bar code and then “0”,
“2”, “1” and “4” bar codes using the Keypad Number Symbols (page 3-72) at the end of this chapter.
To begin setting two discrete lengths, scan this bar code:
Next, scan four numeric bar codes that correspond to the desired value. Single digit numbers must have a leading
zero. If you wish to change your number selection, scan Cancel on the Keypad Number Symbols page.
Length Within Range
This option decodes a code type within a specified minimum and maximum range. For example, when you want
to scan only Codabar symbols containing between 4 and 12 characters, scan the “Codabar Length Within Range”
bar code and then “0”, “4”, “1” and “2” bar codes.
To begin setting lengths within a range, scan this bar code:
Next, scan numeric bar codes that correspond to the desired value using the Keypad Number Symbols (page 3-
72). Single digit numbers must have a leading zero. If you wish to change your number selection, scan Cancel on
the Keypad Number Symbols page.
Any Length
This option decodes Codabar bar codes containing any number of characters.
To set any length, scan this bar code: