IBM 150 Personal Computer User Manual


 
112 RS/6000 43P 7043 Models 150 and 260 Handbook
Device-to-Device Cables
Table 21 describes the device-to-device cables for single-ended applications.
Table 21. Device-to-Device Cables for Single-Ended Installations
Note: Most feature codes for cables are only orderable against the
attachment device (7204, 7206, 7208, and so on.). For some cables, the
feature codes have been made available on the system units. In these cases,
the system feature code will be listed. Otherwise, the attachment device
feature codes will be used.
System-To-System Cables
Table 22 on page 113 provides a 16-bit connection between any two
differential or single ended SCSI devices having 68-pin connectors. It can be
Machine
Type
FC Part
Number
Length
(meters)
Cable Description
SE External
Device
2840 33F4607 0.7 Device-to-Device (where second
device has two connectors), 8-bit
narrow bus
SE External
Device
3130 31F4222 0.66 Device-to-Device (where second
device has one connector), 8-bit
narrow bus
SE External
Device
2860
/9139
52G9921 0.3 Device-to-Device (where second
device has two connectors), 16-bit
wide bus
SE External
Device
2884
/9160
52G4291 0.6 Device-to-Device (where second
device has two connectors), 16-bit
wide bus
SE External
Device
2883
/9150
52G4233 2.5 Device-to-Device (where second
device has two connectors), 16-bit
wide bus
7027 HST 2425
7027 HST 3132 40H7351 6.0 Device-to-Device (where second
device has two connectors), 16-bit
wide bus