Filter
Top Products
Recovering lost or damaged software
The "Create Extended DOS Partition" screen appears, and you
see the message
Extended DOS Partition created.
40. Press [Esc].
You see a message
Enter logical drive size in Mbytes or percent of disk
space (%)...
41. Enter the desired size for the logical drive and press [Enter].
If you do not use the maximum space allocated for the extended
DOS partition, you will be prompted again with the message
Enter logical drive size in Mbytes or percent of disk
space (%)....
Continue to enter the amount of space you want to allocate to
the drives until all the available space in the extended DOS parti-
tion is used up.
When you have finished allocating the space in the extended
DOS partition, you will see the message
All available space in the Extended DOS Partition is
assigned to logical drives.
42. Press [Esc]. You return to the "FDISK Options" screen.
43. Press [2], and then press [Enter].
You see the message
Enter the number of the partition you want to make active.
44. Press [1] and then press [Enter].
You see the message Partition 1 made active.
45. Press [Esc] to return to the "FDISK Options" screen.
46. Press [Esc] again to exit the FDISK utility.
You see a message prompting you to insert a DOS system
diskette into drive A and press any key when ready.
47. Ensure that the bootable recovery diskette is inserted into your
FDD, and then press [Enter].
116
ThinkPad 240 User's Reference