IBM 240 Laptop User Manual


 
Recovering lost or damaged software
24. After the format has completed, you are prompted to enter a
volume label. Type a volume label and press [Enter].
25. After the format has completed, repeat the previous two steps to
format the remaining drives available (replacing "C" with D, E,
and F, etc.).
26. After all drives have been formatted, insert the Recovery CD into
the CD-ROM drive.
27. Type SOFTCP at the command prompt and press [Enter].
The original image will be transferred to your computer. This
process may take from 20 to 30 minutes.
28. When a completion message appears, remove the Recovery CD
from the CD-ROM drive and the bootable recovery diskette from
the FDD.
29. Restart the computer.
As the computer starts, Windows will configure your device and
system settings. Follow the instructions on the screen to finalize
the recovery installation.
120
ThinkPad 240 User's Reference