IBM 240 Laptop User Manual


 
Distinctive functions of your computer
To start the BIOS Setup Utility, do as follows:
1. Remove any diskette from the diskette drive; then turn off the
computer.
2. Turn on the computer; then press F1 while the IBM ThinkPad
logo is being displayed.
The BIOS Setup Utility menu appears:
IBM BIOS Setup Utility
System-unit serial number XXXXXXXXXXXXXXXXXX
System board serial number
Microprocessor name Celeron (R)
Microprocessor speed 333 MHz
UUID xxxxxxxx xxxx xxxx xxxx xxxxxxxxxxxx
XXXXXXXXXXXX
Config
Date/Time
Password
Startup
Restart
F1 Help Select Item Space/- Change Values F9 Setup Defaults
F3/Esc Exit Select Menu Enter Select Sub-Menu F10 Save and Exit
3. Move to an item you want to change using the arrow keys, and
press Enter.
A submenu is displayed.
4. Change the items you wish to change.
To change the value of an item, use the - or space key.
5. Press Esc to exit from the submenu.
Note: If you are in a nested submenu, press Esc until you reach
the BIOS Setup Utility main menu.
6. Press F10 and press Enter to save your changes and exit from
the BIOS Setup Utility menu.
Your computer restarts.
Chapter 1. Getting familiar with your computer 17