Filter
Top Products
Customizing the TrackPoint
Increasing memory
Increasing memory capacity is an effective way to make programs
run faster. Your dealer can increase the amount of memory in your
computer by installing a small outline dual inline memory module
(SoDIMM), available as an option.
Different capacities of SoDIMM are available.
Notes:
1. If you changed the memory installed in the computer, you need
to create a new hibernation file. To create the hibernation file
the Online User's Guide.
Upgrading the memory
You can upgrade the memory of the ThinkPad 240. Please refer to
the following illustration and instructions:
1. Turn the power off. Disconnect all peripherals. Disconnect the
AC adapter.
2. Remove the battery (see “Replacing the battery pack” on
page 34).
3. Open the LCD panel to an angle of between 90 to 130 degrees,
and set the computer on its side.
4. Locate the three screw holes that are marked with a memory
chip icon
. Holding the keyboard with your hand as shown
in the illustration below, remove the three screws from these
holes and set them aside.
Chapter 2. Extending the features of your computer 47