Filter
Top Products
94 Intel
®
Server System SR9000MK4U Product Guide
3. Install the CPU1 / CPU2 MVR cable. See the figure below to locate the connection
point on the server board.
Figure 94. Locating the CPU1 / CPU2 MVR Connection
4. Determine your next course of action and refer to the appropriate steps:
— If you are following these steps as part of another procedure, return to that
procedure.
— If you are ready to re-assemble your server system, install the following items,
in order:
✧ The KVM card, if necessary. For instructions, see “Installing the KVM Card”
on page 90.
✧ All installed PCI cards. For instructions, see “Installing a PCI Card” on
page 59.
✧ The hard drive backplane cover. For instructions, see “Installing the Hard
Drive Backplane Cover” on page 88.
✧ The power supply box. For instructions, see “Installing the Power Supply
Box” on page 80.
✧ All installed power supplies. For instructions, see “Installing a Power Supply”
on page 68.
✧ The power supply filler panel, if necessary. For instructions, see “Removing a
Power Supply” on page 70. Follow step 4 only.
✧ The top cover. For instructions, see “Installing the Top Cover” on page 37.
AF001431