Filter
Top Products
STL2 Server Board TPS Basic Input Output System (BIOS)
Revision 1.0 4-35
Table 4-3. Primary Master and Slave Adapters Submenu Selections
Feature
Choices or Display
Only Description User Setting
Type Auto
None
CD-ROM
ATAPI Removable
IDE Removable
Other ATAPI
User
Select the type of device that is attached to the
IDE channel
If User is selected, the user will need to enter the
parameters of the IDE device (cylinders, heads
and sectors).
Mult-Sector Transfers Disable
2 Sectors
4 Sectors
8 Sectors
16 Sectors
Specifies the number of sectors that are
transferred per block during multiple sector
transfers.
LBA Mode Control Disabled
Enabled
Enable/Disable Logical Block Addressing instead
of cylinder, head, sector addressing.
32 Bit I/O Disabled
Enabled
Enable/Disable 32Bit IDE data transfers
Transfer Mode Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
FPIO 3/ DMA 1
FPIO 4 / DMA 2
Select the method of moving data to and from
the hard drive. (If Type: Auto is select, optimum
transfer mode will be selected)
Ultra DMA Mode Disabled
Enabled
Enable/Disable Ultra DMA mode (If Type: Auto is
select, optimum transfer mode will be selected)
Table 4-4. Processor Settings Submenu Selections
Feature
Choices or Display
Only Description User Setting
Processor Speed XXX (Display Only). Indicates the processor
speed.
Processor 1 Type XXX (Display Only). Indicates the CPUID of the
installed processor.
Cache Ram XXXKB (Display Only). Indicates the cache RAM
size.
Processor 2 Type XXX (Display Only). Indicates the CPUID of the
installed processor.
Cache Ram XXXKB (Display Only). Indicates the cache RAM
size.
Processor #1 Status Normal
1
(Display Only)
Processor #2 Status Normal
1
(Display Only)
Clear Processor Errors Press Enter Clears the processor error information.
Processor Error Pause Enabled
Disabled
If enabled, the POST operation pauses if a
processor error occurs.
Processor Serial Number Disabled
Enabled
Disables/Enables Processor Serial Number.
Note:
1. Possible Values: Normal, None, or Error.