Juniper Networks M120 Network Router User Manual


 
SONET/SDH OC192c/STM64 PIC with XFP
JUNOS 8.3 and later (Type 3)Software release
One OC192 port
Power requirement: 0.52A @ 48 V (25 W)
Description
Multiplexing and demultiplexing
Rate policing on input
Rate shaping on output
Packet buffering, Layer 2 parsing
Hardware features
SONET/SDH framing
Link aggregation
Alarm and event counting and detection
Dual-router automatic protection switching (APS)
Multiprotocol Label Switching (MPLS) fast reroute
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)
Software features
108 SONET/SDH OC192c/STM64 PIC with XFP
M120 Internet Router PIC Guide