Juniper Networks M120 Network Router User Manual


 
ATM2 DS3 IQ PIC
JUNOS 8.0R2 and later (Type 1)
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
Four DS3 ports
Power requirement: 0.41 A @ 48 V (20.0 W)
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface.
ATM standards compliant
Description
16-MB SDRAM memory for ATM segmentation and reassembly (SAR)
ATM switch ID
Configurable framing options:
C-bit with ATM direct mapping
C-bit with Physical Layer Convergence Protocol (PLCP) framing (default)
M23 ATM direct mapping
M23 with PLCP framing
Internal and loop timing
Hardware features
20 ATM2 DS3 IQ PIC
M120 Internet Router PIC Guide