![](http://pdfasset.owneriq.net/a/41/a4191b73-a3d4-4fdf-90cf-ae4f07f2ae2f/a4191b73-a3d4-4fdf-90cf-ae4f07f2ae2f-bg1e.png)
ATM2 OC48/STM16 IQ PIC with SFP
■
JUNOS 8.0R2 and later (Type 2)
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
■
One OC48 port
■
Power requirement: 0.41 A @ 48 V ( 20 W)
■
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface.
■
Conforms to ANSI T1.105-1991 and T1E1.2/93-020R1
■
Complies with ATM and SONET/SDH standards
■
Alarm and event counting and detection
■
Compatible with well-known ATM switches
■
ATM switch ID, which displays the switch IP address and local interface name of the
adjacent Fore ATM switches
■
Optical interface support—see Table 11 on page 31
Description
■
ATM2 IQ 1-port OC48 PICs have one 3010 SAR for segmentation and reassembly into
53-byte ATM cells.
■
High-performance parsing of SONET/SDH frames
■
ASIC-based packet segmentation and reassembly (SAR) management and output port
queuing
■
64-MB SDRAM memory for ATM SAR
■
Packet buffering, Layer 2 parsing
Hardware features
30 ■ ATM2 OC48/STM16 IQ PIC with SFP
M120 Internet Router PIC Guide