Juniper Networks M120 Network Router User Manual


 
Gigabit Ethernet IQ PICs with SFP
Left: 1-port Gigabit Ethernet IQ PIC; Right: 2-port Gigabit Ethernet IQ PIC
1-port: JUNOS 8.0R2 and later (Type 1)
2-port: JUNOS 8.0R2 and later (Type 2)
NOTE: These PICs are not supported in JUNOS Release 8.1R1.
Software release
One or two Gigabit Ethernet ports
Power requirement: 0.46 A @ 48 V (22 W)
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface
Optical interface supportSee Table 16 on page 64
Description
High-performance throughput on each port at speeds up to 1 Gbps
Full-duplex mode
Large MTUs of up to 9192 bytes
Hardware features
Optical diagnostics and related alarms
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
Virtual Router Redundancy Protocol (VRRP) support
802.1q virtual LANs (VLANs)
VLAN stacking and rewriting
Flexible Ethernet encapsulation
MAC policing, accounts, and filters
JUNOS Release 7.0 or later is required to configure graceful Routing Engine switchover
(GRES).
Software features
Gigabit Ethernet IQ PICs with SFP 63
Gigabit Ethernet IQ PICs with SFP