Juniper Networks M120 Network Router User Manual


 
Adaptive Services II FIPS PIC
JUNOS 8.0R2 and later (Type 1)
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
JUNOS-FIPS requires an Adaptive Services II FIPS PIC for external IPSec connections. See
the Secure Configuration Guide for Common Criteria and JUNOS-FIPS for more information.
Supports tunnel services. This feature is included with the PIC and does not require an
individual license.
Individual licenses must be purchased for additional services such as Network Address
Translation (NAT), stateful firewall, intrusion detection services (IDS), IPSec. J-Flow
accounting, and voice services. For information about which services are supported by
PIC and platform type, see the JUNOS Services Interfaces Configuration Guide.
Power requirement: 0.4 A @ 48 V (19 W)
Description
Support for up to 2000 service sets
Active monitoring on up to 1 million flows
Support for MTUs up to 9192 bytes for Gigabit Ethernet and SONET interfaces
Hardware features
Adaptive Services II FIPS PIC 15
Adaptive Services II FIPS PIC