Juniper Networks M120 Network Router User Manual


 
SONET/SDH OC3c/STM1 PIC
JUNOS 8.0R2 and later (Type 1)
NOTE: Although the illustration shows a multimode PIC, a multimode PIC and a single-mode
intermediate reach PIC are both supported.
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
Four OC3 ports
Power requirement: 0.49 A @ 48 V (23.7 W)
Description
Multiplexing and demultiplexing
Rate policing on input
Rate shaping on output
Packet buffering, Layer 2 parsing
Hardware features
SONET/SDH framing
Link aggregation
Alarm and event counting and detection
Dual-router automatic protection switching (APS)
Multiprotocol Label Switching (MPLS) fast reroute
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)
Software features
SONET/SDH OC3c/STM1 PIC 83
SONET/SDH OC3c/STM1 PIC