Juniper Networks M120 Network Router User Manual


 
For a list of the software features available for services PICs, see the JUNOS Services Interfaces
Configuration Guide.
Depending on your JUNOS release and individual licenses, software features for this PIC can
include:
Stateful firewall with packet inspection:
Detects SYN attacks, ICMP and UDP floods, and ping-of-death attacks
NAT for IP addresses
Port Address Translation (PAT) for port numbers
J-Flow accounting exports cflowd version 5 and version 8 records
Tunnel services:
IP-IP unicast tunneling
GRE unicast tunnelingSupports GRE fragmentation
PIM sparse mode unicast tunneling
Virtual tunnel interface for Layer 3 VPNs
IPSec encryption
Voice services:
Compressed Real-Time Protocol (CRTP)
Encapsulations:
Multilink Frame Relay (MLFR)
Multilink Point-to-Point Protocol (MLPP)
Software features
Status LED, one tricolor:
OffPIC is offline and it is safe to remove it from the chassis.
GreenPIC is operating normally.
AmberPIC is initializing.
RedPIC has an error or failure and no further harm can be done by removing it from
the chassis.
Application LED, one tricolor:
OffService is not running.
GreenService is running under acceptable load.
AmberService is overloaded.
LEDs
16 Adaptive Services II FIPS PIC
M120 Internet Router PIC Guide