Juniper Networks M120 Network Router User Manual


 
Table 24: MultiServices PICs Software Features Supported on the M120 Router (continued)
8.38.28.2R2Stateful firewall with packet inspection: detects SYN
attacks, ICMP and UDP floods, and ping-of-death attacks
8.38.28.2R2Network Address Translation (NAT) for IP addresses
8.38.28.2R2Port Address Translation (PAT) for port numbers
8.58.28.2R2IP Security (IPSec) encryption
8.38.28.2R2Active flow monitoring exports cflowd version 5 and
version 8 records
8.58.38.3Active flow monitoring exports flow monitoring version
9 records, based on RFC 3954
8.4Passive flow monitoring
8.5Passive flow collection
8.58.28.2R2Flow-tap
8.4Dynamic flow capture
8.58.28.2R2Real-time Performance Monitoring
8.58.28.2R2Link services
8.38.28.2R2Tunnel services:
IP-IP unicast tunneling
GRE unicast tunnelingSupports GRE
fragmentation
Protocol Independent Multicast (PIM) sparse mode
unicast tunneling
8.38.28.2R2Virtual tunnel interface for Layer 3 VPNs
8.38.28.2R2Layer 2 Tunneling Protocol (L2TP)
8.58.28.2R2Voice services:
Compressed Real-Time Transport Protocol (CRTP)
8.38.28.2R2Encapsulations:
Multilink Frame Relay (MLFR)
Multilink Point-to-Point Protocol (MLPP)
82 MultiServices PICs
M120 Internet Router PIC Guide