Juniper Networks M120 Network Router User Manual


 
Enhanced optical monitoring capabilities
CLI configurable wavelength support
Virtual Router Redundancy Protocol (VRRP) support
802.1q virtual LANs (VLANs) support
802.3ae link aggregation support
RMON EtherStats
Software features
Duplex SC/PC connector (RX and TX)Cables and connectors
Status LED, one bicolor:
OffPIC is not enabled
GreenPIC is operating normally
RedPIC has an error or failure
Port LEDs, one pair:
LinkIf green, the port is online; if there is no light, the port is down
RXIf flashing green, the port is receiving data; if there is no light, the port might be on
but is not receiving data
LEDs
Table 23: Optical Interface Support for 10-Gigabit Ethernet DWDM PICs
Extra-Long Wavelength Serial DWDM, LAN RateParameter
Single-modeOptical interface
Dense wavelength division multiplexing (DWDM)Transceiver type
ITU-T G.694.1Standard
9/125 SMF cable: 49.6 miles/80 kmMaximum distance
1528.77 through 1563.86 nm, 100-GHz ITU gridTransmitter wavelength
0 through 4 dBmAverage launch power
9 dBmTransmit extinction ratio
7 dBm through 24 dBmAverage receive power
7 dBmReceiver saturation
24 dBmReceiver sensitivity
10-Gigabit Ethernet DWDM PIC 79
10-Gigabit Ethernet DWDM PIC