Juniper Networks M120 Network Router User Manual


 
SONET/SDH OC48c/STM16 PIC with SFP
JUNOS 8.0R2 and later
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
Four OC48 ports
Power requirement: 0.86 A @ 48 V (41.4 W)
Description
Multiplexing and demultiplexing on the 1-port PIC
Rate policing on input
Rate shaping on output
Packet buffering, Layer 2 parsing
Hardware features
Optical diagnostics and related alarms
SONET/SDH framing
Link aggregation
Alarm and event counting and detection
Dual-router automatic protection switching (APS)
Multiprotocol Label Switching (MPLS) fast reroute
Encapsulations:
High-Level Data Link Control (HDLC)
Frame Relay
Circuit cross-connect (CCC)
Translational cross-connect (TCC)
Point-to-Point Protocol (PPP)
Software features
SONET/SDH OC48c/STM16 PIC with SFP 99
SONET/SDH OC48c/STM16 PIC with SFP