Juniper Networks M120 Network Router User Manual


 
10-Gigabit Ethernet PIC with XENPAK
10-Gigabit Ethernet PIC with XENPAK: JUNOS 8.0R2 and later (Type 3)
XENPAK-OTN transceivers: JUNOS 9.0R2 and later
NOTE: This PIC is not supported in JUNOS Release 8.1R1.
Software release
One 10-Gigabit Ethernet port
Power requirement: 0.55 A @ 48 V (26.6 W)
Supports large Ethernet frame sizes for more efficient throughput across the intra-POP
network
Optical interface supportSee Table 19 on page 74 and Table 20 on page 75
Description
High-performance throughput at speeds up to 10 Gbps
Full-duplex mode
Maximum transmission units (MTUs) up to 9192 bytes
64 source MAC address filters
960 destination MAC filters
Hardware features
Virtual Router Redundancy Protocol (VRRP) support
802.1q virtual LANs (VLANs) support
802.3ae link aggregation support
RMON EtherStats
Optical diagnostics and related alarms :
Transceiver temperature
Laser bias current
Laser output power
Receive optical power
Software features
10-Gigabit Ethernet PIC with XENPAK 73
10-Gigabit Ethernet PIC with XENPAK