Filter
Top Products
26
LAN connections Wireless LAN
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 102
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 103
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 104
SUBNET MASK 255. 255. 255. 000
IP ADDRESS 192. 168. 100. XXX
SUBNET MASK 255. 255. 255. 000
DHCP OFF
WLAN AD HOC MODE OFF
WLAN ESS ID abcdef
WLAN CH 2
IP ADDRESS 192. 168. 100. 101
SUBNET MASK 255. 255. 255. 000
PC wireless LAN driver settings
NetworkType Infrastructure
ESS ID abcdef
Channel 2
Encryption Mode Open System
PROXY SERVER NO USE
DHCP SERVER NO USE
IP ADDRESS 192. 168. 100. 100
SUBNET MASK 255. 255. 255. 000
STATION
ESS ID abcdef
Encryption Mode Open System
BR-DV6000
PROFESSIONAL
MENU RESET
A.DUB
EJECT
COUNTER
AUDIO INPUT
SELECT
MONITOROUTPUT REMOTE
LOCAL
CTL L
MIX
R
CH-1/2
MIX
CH-3/4
DV
LINE
Y/C
(CPN)
TC
UB
REW STOP FF
REC
OPERATE
PLAY PAUSE
DISP
SET SEARCH+
BLANK CUE UP
HOLD
PHONES REC LEVEL
CH-1/3 CH-2/4
MIC
SEARCH–
Mini
Network Type (Ad Hoc/Infrastructure)
Make sure ESS ID and Channel settings
are the same.
Set a unique number to avoid doubling
Set the same domain
* For the PC settings when using a LAN card,
refer to the instruction manual included with
the LAN card.
\ Wireless Connections, Multiple Client PC to a Single VTR
SA-DV6000 allows up to a maximum of 10 clients to be connected at the same time via a network for viewing streaming data. If the
client is a media server or equivalent, more clients can view streaming data via the server. (The number of client connections allowed
differs depending on the server.)
A total of 10 clients can connect simultaneously, clients can be using Streamproducer and Windows media player to view the VTR’s
output.
Configure the VTR as follows:
● DHCP must be OFF.
● The WLAN AD HOC Mode must be OFF.
● The WLAN ESS ID, WLAN CH, and WEP encryption key must match the access point
● If clients will be connecting through an Intranet or the Internet, consult you IT department and request a IP address for the VTR.
● VTR and Client PC are set the same domain and different IP addresses.
27
LAN connections Proxy Settings
It is necessary to select whether to use a proxy server or not depending on the network environment.
To determine if you are using a proxy server.
1.
From Internet Explorer, click on the ‘Tools’ in the menu bar,
and then click on ‘Internet Options’.
2.
From the window that opens, click on the ‘Connections’ tab.
3.
From the ‘Connections’ window, click on the ‘LAN Settings’
button.
4.
If ‘Use a proxy server’ is checked in the window that opens,
then you use a proxy server to access the Internet.
● If this is not checked, then you don’t use a proxy server,
and your configuration is complete.
5.
Click on the ‘Advanced’ button.
6.
In the ‘Exceptions’ box of the window that opens, enter the
first portion of the VTR IP address followed by.‘*.*’ For ex-
ample, the IP address of a VTR may be 192.168.100.101, so
192.168.*.* has been entered
7.
Click ‘OK’ in all open windows.