Filter
Top Products
54
Network remote control ENCODE PARAMETERS
Clicking ENCODE PARAMETERS on the left of the Streamcorder screen displays the ENCODE PARAMETERS
screen for performing video/audio compression settings.
Click the OK icon to
confirm setting.
Screen selection
Setting
Select the setting from the
pull-down menu.
Setting range
ⅷindicates default factory setting.
Item
Frame Size
Bit Rate
Frame Rate
Description
Sets the video compression size.
320 × 240: Sets the image size to 320 × 240 pixels. (SIF)
160 × 120: Sets the image size to 160 × 120 pixels. (QSIF)
(1/4 image size of SIF.)
Sets the video streaming speed.
Sets the frame rate per second. The maximum tranmitted frames per second varies de-
pending on the FRAME SIZE and BIT RATE settings as shown below:
\ NTSC signal
\ PAL signal
* The frame rates shown in the table are not guaranteed values.
Setting
ⅷ320 × 240
160 × 120
56K (bps)
128K (bps)
256K (bps)
ⅷ384K (bps)
512K (bps)
MAX
ⅷMID
MIN
FRAME SIZE
BIT RATE 320 × 240 160 × 120
MAX MID MIN MAX MID MIN
512K 15 10 7.5 30 15 10
384K 15 10 7.5 30 15 10
256K 15 7.5 5 30 15 7.5
128K 7.5 5 3 15 10 7.5
56K 3 1 1 10 7.5 5
FRAME SIZE
BIT RATE 320 × 240 160 × 120
MAX MID MIN MAX MID MIN
512K 12.5 5 5 25 12.5 12.5
384K 12.5 5 5 25 12.5 5
256K 12.5 5 5 25 12.5 5
128K 5 5 1 12.5 12.5 5
56K 1 1 1 12.5 5 5
→
OVER
55
Item
Stream Type
PRE FILTER
Description
Sets the player for stream playback.
AD1 is effective for video with many still images and AD2 is effective for video with motion.
Setting
ⅷFor Media
Player
For Quick
Time
ⅷAD1
AD2
Memo
• No sound will be heard when playing back using QuickTime while in the WMP mode.
• No sound will be heard when playing back using Media Player while in the QT mode.
• Set to WMP mode when recording to CF memory card.
Network remote control ENCODE PARAMETERS
ⅷindicates default factory setting.