Filter
Top Products
www.kodak.com/go/aiosupport 84
KODAK HERO 2.2 All-in-One Printer
Editing a phonebook entry
1. Press .
2. Press to select Send Fax, then press OK.
3. Press
OK to select Fax Options.
4. Select Edit Phonebook, then press OK.
5. Press to select Edit Entry, then press OK.
6. Press to select the entry you want to edit, then press OK.
7. Press to select the field you want to edit, then press OK.
8. Use the LCD keyboard and/or numeric keypad to make your change(s).
9. Press to select DONE, then press OK.
Deleting a phonebook entry
1. Press .
2. Press to select Send Fax, then press OK.
3. Press
OK to select Fax Options.
4. Select Edit Phonebook, then press OK.
5. Press to select Delete Entry, then press OK.
6. Press to select the entry you want to delete, then press OK.
NOTE: If you do not want to delete the entry, press .
7. To delete the entry, press OK.
The entry is deleted from the phonebook.
8. Repeat steps 4 – 5 to delete more entries; when you are finished, press .
Using the numeric keypad on the control panel to enter text and/or numbers
The number keys on the numeric keypad represent a number and several characters.
For example, the number 2 key also represents the letters A, B, C and a, b, and c. You
must press the 2 key multiple times to enter a corresponding letter. For example, to
enter the letter “B” as the first letter of a name, press the 2 key two times; to enter
the lowercase “b” at the beginning of a name, press the 2 key five times. If the
lowercase “b” is not at the beginning of a name or word, press the 2 key two times.
If you need to use the same key for more than one letter in a row (for example, to
type “Cab”), you need to pause between letters. To type “Cab”, press the 2 key three
times to enter “C”, then pause 3 to 4 seconds; press the 2 key once to enter “a”, then
pause 3 to 4 seconds; and press the 2 key two times to enter “b”. You do not need to
pause if the next letter is on a different key.
Note that the Symbols (*) key and the Space (#) key also cycle through several
different symbols when you press the key multiple times.
To make a correction to your entry, press
BKSP (navigation button) on the control
panel to erase the rightmost character.