Filter
Top Products
Printing
13-2 Part No. 1H9613 June 1997
Changing between PostScript and Raster Printing Modes
NOTE: If you are setting up a
Kodak Digital Science
™ Desktop
Color Proofer 9000, you may wish to refer to the user’s
guide for the Network Interface card shipped with the
proofer for instructions on using the display/control panel
1. Press
Setup/Select
on the display panel when “READY”
appears in the panel.
2. Press until “SETUP:MODE” appears.
3. Press
Setup/Select
to access the SETUP:MODE submenu.
4. Press until “MODE:POSTSCRIPT” or
“MODE:RASTER” appears.
The currently selected version is indicated by an asterisk (*).
5. Press
Setup/Select
to make your choice.
6. Press until “MODE:EXIT” appears.
7. Press
Setup/Select
.
8. Press until “SETUP:EXIT” appears.
9. Press
Setup/Select
.
If you change the print mode, wait for the printer to reinitialize and
return to “READY.”
Power
Error
Cancel
Print
Setup/Selectscroll
”“
”“
”“
”“