Filter
Top Products
Novell NetWare
6-6 Part No. 1H9613 June 1997
The following example creates a print server: ps1 (K123458 for
NetWare 4.x) and a queue: lp1 on the server: raisa. You could
create subsequent queues on raisa that use the same print
server, ps1. The printer can serve multiple queues on any server.
Defining the Network Interface Card as a Print Server
Do the following steps to define the Network Interface Card in the
printer as a print server. You only need to do this once on each file
server that will access the printer.
1. Log in to the file server as SUPERVISOR/ADMIN in the main
context, then run the NetWare PCONSOLE utility.
2. For NetWare 3.X, go to Step 3.
For NetWare 4.X:
At the PCONSOLE main menu, press
F4
to switch to bindery
mode.
If a message tells you that you cannot switch to Bindery
mode, you may not be logged in as ADMIN or do not have the
Bindery Context set up on the server.
To verify and/or set up Bindery Context, check for or add the
following line to the SYS: \SYSTEM\AUTOEXEC.NCF file on
the 4.x server:
Set Bindery Context = O = <Organizational Unit>
where <Organizational Unit> is specific for your site.
3. For NetWare 3.X, select Print Server Information from the
main menu.
For NetWare 4.X, select Print Servers from the main menu.
Available Options
Change Current File Server
Print Queue Information
Print Server Information