Filter
Top Products
Network Printer Parameters
4-4 Part No. 1H9613 June 1997
2. Press until SETUP: PORTS appears.
3. Press
Setup/Select
to access the SETUP: PORTS submenu.
4. Press until PORTS: IPX appears.
5. Press
Setup/Select
to access the list of frametypes.
6. Press until the appropriate frametype appears.
The current setting is identified by an asterisk (*).
The available choices are 802.2, 802.3, SNAP, Ethernet II,
and AutoSelect.
7. Press
Setup/Select
to choose the frame type.
8. Press until IPX: EXIT appears.
9. Press until SETUP: EXIT appears.
10. Press
Setup/Select
.
Primary/Preferred Server
The primary or preferred server is the name of the file server that
contains the KSETUP configuration file for Novell environments.
In most environments it may not be necessary to define a
preferred server (factory default setting). If you have any
problems, you should define the preferred server as a
troubleshooting precaution.
NOTE: In environments with hundreds of servers, the printer
logs in to the preferred server instantly (seconds) instead
of potentially searching through hundreds of servers
(minutes) to find the KSETUP file. In an environment with
only one server, you may find it necessary to define that
server as the preferred server.
The following utilities are provided with your Novell Utilities
diskette for downloading a primary server name to your printer:
• PSSERVER.PS for defining a primary server with the printer
in PostScript mode.
”“
”“
”“
”“
”“