Filter
Top Products
Installing Software for the Network Interface
Part No. 1H9613 June 1997 3-1
3 Installing Software for the Network Interface Card
Two diskettes are included in the kit for the Network Interface
Card. One is Utilities for Novell NetWare and the other is Utilities
for UNIX TCP/IP.
Installing Software for the Network Interface Card with
Novell IPX
The following files are provided on the Utilities for Novell NetWare
diskette:
• KSETUP.EXE for creating a Novell Configuration file.
NOTE: Refer to “Novell NetWare” for specific instructions on
creating and editing the IPX KSETUP configuration file.
• README instructions for defining a primary server. Refer to
”Printer Parameters” for specific details regarding the primary/
preferred server.
• PSSERVER.PS for defining a primary server by editing a
PostScript file (<filename>.ps) that can be downloaded to the
printer in PostScript mode.
• RSSERVER.EXE for defining a primary server and creating a
Raster file (RSSERVER.RS) that can be downloaded to the
printer in Raster mode.
• CNTL_D file must be appended to the PSSERVER.PS/
RSSERVER.EXE file that is downloaded through the parallel
printer port.
Installing Software for the Network Interface Card with
AppleTalk
It is not necessary to install software to use the Network Interface
Card with AppleTalk. Utilities are provided with Macintosh-Kodak
printer software, however, that allow you to replace default
AppleTalk related parameters with custom names. To minimize
problems, we recommend that a printer be brought up on the
network utilizing its default parameters before you define custom
parameters.