Filter
Top Products
Network Printer Parameters
4-8 Part No. 1H9613 June 1997
The file opens in TeachText.
3. Replace “YourZoneNameGoesHere” in the following line with
the name of your zone.
NOTE: Do not remove the parentheses from the command.
(%EtherTalk_NV)<</EtherTalkZone (YourZoneName-
GoesHere)>> setdevparams
4. Save the file, and quit.
5. Select the LaserWriter 7.x icon in the Chooser.
NOTE: LaserWriter 7.x is included with Kodak software.
6. Open the LaserWriter Font Utility.
7. Select “Download PostScript File” from the Utilities menu.
8. Double-click on the Set_EtherTalk_Zone.PS file.
The new zone name remains in the printer’s nonvolatile memory.
To verify that the printer is located in the new zone, open the
Chooser and click on the appropriate zone. If the download was
successful, the printer appears in that zone’s list of printers.
Get_EtherTalk_Zone.PS - Retrieves the currently defined zone. It
is only useful with the Macintosh’s LaserWriter Font Utility that
saves the information returned in a PostScript.log file.