Filter
Top Products
17
A4
5. How to Supply Paper, Toner, Staples
This section contains information regarding the paper trays, how
to refill toner and replace staples.
5.1 Supply Paper
General
This system is equipped with up to 4 paper trays and a multi-
sheet bypass. If paper of a certain size has been used up, the
corresponding paper size indicator on the screen will fade.
The Symbol appears on the display and blinks whenever the
chosen paper tray is empty.
How to supply paper in the 500-sheet-trays
1. Withdraw the tray from the unit as far as it will go.
2. If required, the guide plates (universal trays) can be adjusted
to a different size. In this case, set the size indication dial (at
the right side) at the correct copy size!
3. Fan the paper before inserting it!
4. Stack paper into the tray with the curly side up. Paper must
not be stacked higher than the red mark. If trays are over-
stacked, the system might not copy!
5. Push the paper tray into the unit until it locks into place.
Press the HELP key, while the basic screen is displayed, to call up
the Basic Help Screen. Pressing the soft key for any of the paper
trays will display a help screen explaining how to refill paper.