27
7. Simple Copying
STAPLE
– The presently selected stapling position is shown in the
STAPLE key. For a different stapling position, press the key
STAPLE SET to call up the screen shown on the left.
– Select the required stapling position for your document, and
confirm the setting with OK.
Only press the ADD STAPLER key when
the copier does not staple any more (see
page 20).
7.5 Basic Functions
The basic functions are selected on the Basic screen shown on the
left, which consists of the following two parts.
User instructions appear on the left side at the top.
The lower area of the screen displays the present basic function
selections.
The soft keys on the screen are pressed to select the functions.
For some functions pop-up menus appear, in which further
selections are made.
7.5.1 Copy Mode / Duplex Copying
– Press one of the four keys.
double-sided original 3 double-sided copy
double-sided original 3 single-sided copy
single-sided original 3 double-sided copy
single-sided original 3 single-sided copy