Filter
Top Products
21
5. How to Supply Paper, Toner, Staples
Remove the staple cartridge.
Insert the new staple case into the cartridge, until the arrows on
the case and the cartridge are aligned over each other. Only now
remove the tape holding the staples in place.
Insert the staple cartridge into the finisher in such a way, that
the green part is visible. Press on this green area until the
cartridge clicks into place.
Close the finisher front door. Touch BACK on the check stapler
screen and wait until the stapler returns to its original position.
The basic screen will be restored.
Remove the empty staple case.