Konica Minolta 7020 All in One Printer User Manual


 
22
6. Before Copying
6.1 Weekly Timer
The copier provides a timer function that can be activated by the
operator. In this case, please do not switch the unit on and off at
the main power switch; the machine turns on and off automatically.
Timer Interrupt
Press the Power switch on the left side of the panel.
A four digit timer interrupt password is needed if the operator
has installed a password. Enter the code and touch START.
Now specify the actual ON-time period; hours one-digit and
minutes two-digit numbers (e.g. 2 h, 05 minutes). Confirm
each input by pressing START.
After the specified period, the system will automatically go off
again.
6.2 User Password / Electronic Key Counter (EKC)
The message on the screen instructs you to
enter a user password.
This unit has an integrated electronic key counter, which mana-
ges up to 128 user accounts. Copies can be allocated to users,
accounts or projects, if the key operator has activated this func-
tion. A copy limit can be allocated to each counter.
If the electronic key counter is activated in this unit, a user pass-
word has to be entered to access the machine. Please contact
your key operator, if you need a password or can‘t remember
your allocated password.
Password Access:
After switching on the system, a request to enter a password is
displayed on the screen.
Enter your 5-digit code over the keypad, and press START.
If you hit a wrong key, still enter 5 digits in total, and then press
START. Now repeat the procedure with the correct code.
The number of copies made as well as the copy limit for this
counter are now displayed for a moment.
If the copy limit has been reached for any password, the
system will not produce any further copies under this code.
Depending on how the copier is adjusted, a copy job in
progress can either be completed or will be interrupted.
Please contact the operator if a timer
interrupt password is needed or a change
of the ON/OFF times is required.