Applications 9-41
Applications
Stamp/Overlay (continued)
1 Touch APPLI. on the Basic Screen to display the Application Selection Screen.
2 Touch Stamp/Overlay. The Stamp/Overlay Selection Screen will be displayed.
3 Touch to select the desired stamp to display the subsequent screen.
On each screen, you can specify the desired type of the selected stamp.
4 When selecting STAMP, SET NUMBERING, PAGE NUMBERING, or DATE/TIME,
select the desired position from 9 location keys on each screen.
If fine adjustment is required, touch FINE ADJ. OF POSITION to display the Fine
Adjustment Setting Screen.
Touch UP SIDE, RIGHT SIDE, DOWN SIDE, or LEFT SIDE to specify the direction, then
use the touch screen keypad or up/down arrow key to enter the desired amount.
Fine Adjustment Setting Screen
5 Touch CHARACTER SIZE, if desired, to change the character size. The following
options are provided:
STAMP : LARGER/ SMALLER
SET NUMBERING : 20pt/ 36pt
PAGE NUMBERING : 8pt/ 10pt/ 12pt/ 14pt
DATE/TIME : 8pt/ 10pt/ 12pt/ 14pt
6 Touch PRINTED PAGE on the Stamp Selection, Set Numbering Type Selection, or
Date/Time Type Selection Screen to designate whether to print the selected stamp on
the cover only or on all pages.
Touch PRINTED PAGE on the Page Numbering Type Selection Screen to designate
whether to print the page numbers on all pages, except the front cover, or except the
front/back covers.
7 Touch STARTING No. on the Set Numbering, Page Numbering, or Watermark
Numbering Type Selection Screen to display the Starting No. Setting Screen (see
above). Use the touch screen keypad or up/down arrow key to enter the desired
starting number, then touch OK to return to the previous screen.
8 When selecting WATERMARK or WATERMARK NUMBERING, touch LIGHT,
NORMAL, DARK, or DARK+ to select the desired density level on each screen.
9 The Overlay function will be selected simply by touching OVERLAY to highlight it.
10
When all the desired selections are made, touch OK to return to the Application
Selection Screen.
Starting No. Setting Screen