Filter
Top Products
2-8 Safety Information
Safety Information
• If the copier will not be used for a short period of time (overnight, etc.), turn the
main switch OFF (O).
If it will not be used for an extended period of time (vacations, etc.), remove the
power plug from the outlet for safety purposes during the time the copier is not
in use. .....................................................................................................................
• ALWAYS hold the designated parts only when lifting or moving the copier. .........
• For safety purposes, ALWAYS remove the power plug from the outlet when
performing cleaning operations..............................................................................
• If dust accumulates within the copier, there is a danger of fire or other trouble. It
is therefore recommended that you consult with your service representative in
regard to cleaning of internal parts. This is particularly effective if accomplished
prior to seasons of high humidity. Consult with your service representative in
regard to the cost of cleaning the internal parts of the copier. ..............................
• DO NOT leave the document feeder open as there is a danger of personal
injury. ......................................................................................................................
Other precautions
• DO NOT place heavy objects on the copier or cause other damage to the copier.
• DO NOT open the front cover, turn off the main switch, or pull out the power plug
during copying.
• During copying, some ozone is released, but the amount does not cause any ill
effect to one's health. If, however, the copier is used over a long period of time in
a poorly ventilated room or when making an extremely large number of copies,
the smell may become unpleasant. To maintain the appropriate environment for
copy work, it is suggested that the room be properly ventilated.
• When lifting or moving the copier, contact your service representative.
• Do not touch electrical parts, such as connectors or printed circuit boards. They
could be damaged by static electricity.
• DO NOT attempt to perform any operations not explained in this handbook.
• CAUTION : Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.