Filter
Top Products
Applications 9-31
Applications
AUTO Layout
Use this function to detect the image area of the original and center the whole image on
the copy paper.
❒ Copy mode is automatically set to 1-1; 1-2 mode is also available only when using Store
mode.
❒ APS and AMS are automatically released. Changing Magnification is available.
❒ Non-image area erase is automatically selected. (Release it manually when using RADF to
scan originals.)
❒ Original/Copy size: 11"x17", 8.5"x14", 8.5"x11"R, 8.5"x11", 5.5"x8.5"
❒ Incompatible Basic Copying Conditions: APS, AMS, Rotation Sort, Rotation Group, Folding or
Stapling & Folding with Booklet
❒ Incompatible Special Originals: Mixed Original, Z-folded Original, SDF
❒ Incompatible Applications: Sheet/Cover Insertion, Combination, Booklet, Image Insert, Reverse
Image, Repeat, All-Image Area, Image Shift, Overlay
NOTE: The AUTO layout function may not operate properly if the lighting in the work place is directly over the
platen glass. In this case, consult your service representative about an appropriate place for installation.
AUTO layout copying
Set original
Application Selection Screen