Filter
Top Products
Job Memory 10-5
Job Memory
Job Recall (continued)
1 Place original(s) as required for the job you are about to recall.
2 Press [JOB MEMORY] to display the Job No. Selection Screen.
(See sample screen, previous page.)
3 Touch a Job No. key to select a job you want to recall, and to highlight the key.
If required, scroll with the arrow keys to reach the desired Job No. key (1~30).
To cancel the recall mode, touch CANCEL to return to the Basic Screen.
4 Touch JOB CHECK. The Job Recall Check Screen displays to enable you to review the
settings. Touching CANCEL on the Job Recall Check Screen returns to the Job No.
Selection Screen.
(See sample Job Recall Check Screen, previous page.)
5 When the desired Job No. key is highlighted, touch OK to read the settings of the
selected job, and to return to the Basic Screen.
To cancel the job, press [AUTO/RESET].
6 Press [START].
NOTES:
1 A locked job is indicated by a lock icon on the Job key number.
2 Only the key operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the key operator.
4 A blank key indicates that no job is storedw under that key.
5[✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽✽] displayed on a Job number key indicates that a job is stored but unnamed.
6 Job Memory entries can be recorded on the Job Memory Form included at the end of this section.