Kyocera copier All in One Printer User Manual


 
1-10 Introduction
Introduction
Features of This Machine (continued)
Sheet/Cover Insertion
Insert up to 30 blank or copied sheets from any tray including the Multi-Sheet Bypass
Tray, or insert blank or copied front and back covers from any tray including the Multi-
Sheet Bypass Tray.
Stamp/Overlay
Imprint a stamp, watermark, or scanned image onto the copy image.
Staple
Select the stapling position and number of staples (3 positions).
STD Size (Special)
Detect the standard paper sizes which cannot normally be detected (A4R and A5) when
loaded in a main body tray. A5R and F4 sizes will also be available when loaded in the
Multi-sheet bypass tray.
Text/Photo Enhance
Enhance photo image in Photo mode; regular image in Auto mode; enhance text image
in Text mode; enhance lighter image in increase contrast mode.
Transparency Interleave
Copy onto transparency film and interleave blank or copied paper for each original
copied.
Userset Density (USERSET 1, USERSET 2)
Output up to 16 density samples on a total of 4 pages that display 4 samples per page,
then program the desired density under USERSET 1 and/or USERSET 2.
Weekly Timer
Can be set according to the needs of each work environment. Turn main body power
Off/On daily or weekly, during lunch time, on holidays, and also enable the timer-
interrupt mode, which allows temporary use of the machine even when the machine is in
the daily, weekly, or holiday Off mode.
Wide Size Paper
Copy onto paper slightly larger than the specified regular size.
Z-Folded Original
This feature sets the RADF to accept Z-folded originals.