Filter
Top Products
13-48 Key Operator Mode
Key Operator Mode
Finisher Adjustment [17]
Use this mode to make fine adjustments to each function of the finisher.
Key Operator Mode Screen 2 Finisher Adjustment Menu Screen
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note.)
2 To display menus [11] to [18] of the Key Operator Mode Screen, touch Lower
arrow key.
3 Touch [17] Finisher adjustment to display the Finisher Adjustment Menu Screen.
4 Touch the desired menu key to display the adjustment screen for each function.
5 Make fine adjustment on the screen. To go on or back to another adjustment screen,
touch NEXT or PREVIOUS. Touching PREVIOUS SCREEN restores the Finisher
Adjustment Menu Screen.
6 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
7 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
Stapling&Folding Stopper Position Adjustment Screen
Folding Stopper Position Adjustment Screen
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.