Filter
Top Products
Basic Operations 6-5
Basic Operations
Copy Mode (continued)
Copy Mode Using RADF
Before selecting the Copy Mode shown on the screen below, read specifications on the
previous page and see Section 4 for information on positioning originals.
1 Touch the desired mode key on the Basic Screen: 1
ss
ss
s1, 1
ss
ss
s2, 2
ss
ss
s1, or 2
ss
ss
s2.
A copy mode key will appear dimmed if it is incompatible with other selections made.
2 Position originals FACE UP in the document feeder, as required.
3 When all settings are acceptable, press [START].
To cancel the mode, touch the desired Copy Mode key on the Basic Screen.
NOTE: When the finisher capacity is exceeded due to the print quantity selected, remove the copied sets
while the paper is exiting; otherwise, mishandled paper will occur.
Basic Screen (with 1s2 mode selected)