Filter
Top Products
5-6 Copier Management
Copier Management
Weekly Timer Function
When a copier is under control of the weekly timer function, the TIMER indicator on the
right side of the control panel is lit.
Important: When the TIMER indicator is lit, the copier will automatically be turned off. Do
not turn it off by pressing power switch.
Timer Interrupt
When the TIMER indicator light is on and other indicators are off, copying is unavailable
due to the weekly timer function.
However, copying is available by following procedure.
1 Press the [POWER SAVER ON/OFF].
The Basic screen will be displayed along with the messages shown below.
Please wait
Copier is warming up
Timer interrupt mode
Enter password
NOTE: The timer interrupt password is not factory set and must be entered by the key operator (see p. 13-36
in “Section 13: Key Operator Mode”). In the event the timer interrupt password has not been entered
by the key operator, the message shown in Step 3 will display instead.
R
INTERRUPT
PROOF COPY
TIMER
STOP
START
CLEAR QTY.
COUNTER
POWER SAVER
ON / OFF