Filter
Top Products
Copier Management 5-7
Copier Management
Weekly Timer Function (continued)
2 Enter a 4-digit number timer interrupt password using the keypad on the control panel.
If an invalid password is entered, continue by entering the valid 4-digit password.
Timer interrupt mode
Enter password ✻✻✻✻
3 Press the [START].
Input copy time
0 hour(s) 05 minute(s)
4 Enter a 1-digit hour (ex. 3 hour is 3) using the keypad on the control panel. (0 ~ 9)
5 Press the [START].
Input copy time is
3 hour(s) 05 minute(s)
6 Enter a 2-digit minutes (ex. 7 minutes is 07) using the keypad on the control panel. (05
~ 60)
Input copy time is
3 hour(s) 07 minute(s)
7 Press the [START].
Copying is available until the set time is up.
Align original on RADF unit
8 When timer interrupt of the copier is finished, press the [POWER SAVER ON/OFF].
The Shut-Off Setting Screen will be displayed.
9 Touch YES. The copier returns to the OFF state and copying is disabled.
Shut-Off Setting Screen