Filter
Top Products
Key Operator Mode 13-11
Key Operator Mode
Copier Initial Setting [2] (continued)
Key Operator Mode Screen Copier Initial Setting Screen
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE: If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch [2] Copier initial setting to display the Copier Initial Setting Screen.
3 Make a selection for each mode as initial settings.
Touch RADF to select or deselect it.
4 Touch OK to complete the setting and return to the Key Operator Mode Screen.
5 If no further changes are required, proceed to step 7.
6 If other key operator settings are required, touch desired key.
7 Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.