6-6 Basic Operations
Basic Operations
Copy Mode (continued)
1s2 Copy Mode Using Platen Glass
When copying in 1-2 mode from the platen glass, use the Platen store mode. Refer to p.
4-2 for details on positioning originals.
1 Open the document feeder.
2 Place original FACE DOWN on the platen glass, then close the document feeder.
IMPORTANT: PLACE AND SCAN ORIGINALS IN REGULAR ORDER OF PAGINATION.
3 Touch 1
ss
ss
s2, then make the desired copying selections.
The STORE key is automatically highlighted on the screen.
4 Press [START] to scan the original.
5 Repeat steps 1, 2 and 4 until all originals are scanned.
6 Touch STORE to exit the store mode. The STORE key will return to the normal display.
7 Enter the print quantity using the keypad. The quantity entered will be displayed on the
upper right message area of the Basic Screen.
To change the print quantity, press [C (CLEAR QTY.)] and re-enter the correct quantity.
To delete the scanned data without printing, press [STOP], then touch EXIT on the
popup menu to be sure the data is deleted.
8 Press [START] to print.
Basic Screen (with 1s2 mode and store mode)