Filter
Top Products
Key Operator Mode 13-21
Key Operator Mode
ECM (Electronic Copy Monitor) Function Setting [4] (continued)
E.C.M. All Count Reset [2]
Reset the count for all ECM accounts.
ECM Setting Menu Screen ECM All Count Reset Screen
1 Press [HELP] to display the Help Screen, then touch Key Operator Mode.
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [4] E.C.M. function setting. The ECM Master Key Code Screen displays, if a
code is required.
3 Enter your 8-digit ECM master key code, then touch OK to display the ECM Setting
Menu Screen. (See note 2.)
4 Touch [2] E.C.M. all count reset. The ECM All Count Reset Screen will be displayed.
5 Touch YES to reset all counters to zero and to return to the ECM Setting Menu
Screen.
Or, touch NO to cancel. Touching PREVIOUS SCREEN will also cancel this function
and return to the ECM Setting Menu Screen.
6 If other ECM setting changes are required, touch desired key, from [1]~[3].
7 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
8 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid ECM master key code is entered, continue by entering the valid 8-digit code.