Filter
Top Products
Server Function 11-5
Server Function
Image Store/Delete Mode (continued)
To Store Image Data in HDD (continued)
Image Data Password Entry Screen Job Name Entry Screen
1 Press [MODE] to light up the [SCANNER/SERVER] LED. The Scanner/Server Setting
Menu Screen will be displayed.
2 Touch IMAGE STORE/DELETE to display the Image Data Password Entry Screen.
3 Enter the desired image data password in up to 8 characters from the touch screen
keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct password.
4 If the password is correct, touch OK to display the Job Name Entry Screen.
Enter the desired job name in up to 8 characters from the touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct job name.
5 If the job name is correct, touch OK to display the Scanner Setting Screen.
6 Select the desired scanning conditions. Print quantity cannot be entered.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.
Scanner Setting Screen