Filter
Top Products
11-8 Server Function
Server Function
Image Store & Output Mode
Use this function to store the scanned image data in HDD after copying is completed.
This storing function does not conflict with any other copying conditions.
NOTE: Installation of the optional HDD is required for this function. With the HDD installed, the HDD STORE
key will be displayed on the Output Menu Screen.
1 Touch OUTPUT APPLI. on the Basic Screen to display the Output Menu Screen.
2 Touch HDD STORE. The Image Data Password Entry Screen will be displayed.
3 Enter the desired Image data password in up to 8 characters from the touch screen
keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct password.
4 If the password is correct, touch OK to display the Job Name Entry Screen.
Enter the desired job name in up to 8 characters from the touch screen keypad.
To correct an entry, touch 1-CHARACTER DELETE repeatedly to delete each character,
then enter the correct job name.
5 If the job name is correct, touch OK twice to return to the Basic Screen.
6 Select the desired copying conditions, then enter the desired print quantity.
7 Position original(s) FACE UP in the document feeder or FACE DOWN on the platen
glass.
When using Platen store mode, see p. 6-28 to p. 6-29.
When using RADF store mode, see p. 6-30.
Output Menu Screen (with Finisher)
Output Menu Screen (without Finisher)
Job Name Entry Screen
Image Data Password Entry Screen